







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunrise Manor Homeowners Choose PGT Construction
We provide independent PGT construction service in Sunrise Manor, NV, and we work on the brand’s window and door systems, including the aluminum and vinyl lines, without being tied to any manufacturer. What sets our PGT work apart is that we already know how these products fail in desert conditions: the specific UV damage, heat cycling and dust intrusion that wipe out window seals, rollers and frame finishes faster here than the manufacturer’s general literature accounts for. Our technicians have up to 11 years of experience, and we repair, install and service PGT equipment with quality parts that fit it. We are not affiliated with or authorized by PGT, and we don’t pretend otherwise. Call (833) 516-4965 for a free estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday – closed Saturday.

Why Trust Sunrise Manor Construction for Your PGT Construction?

PGT builds windows and doors rated for serious weather, and when they’re installed correctly, they hold up. The trouble usually comes at the edges: the gaskets, the rollers, the seals and the frames, not the glass itself. Our technicians have spent years working on the aluminum and vinyl lines and know which components are most likely to give out first after years of desert heat cycling. They also know which repairs keep a good frame in service and which fall apart six months in.
We repair with quality parts that fit PGT equipment. We don’t claim to be a dealer or to have factory authorization, so our recommendations come from what’s actually best for your home, not what’s best for the brand’s sales numbers. That matters in Sunrise Manor, where the housing stock is dominated by mid-century block-and-stucco homes being retrofitted for the 21st century. When a window fails after a re-roof, or a sliding door seizes after a slab pour, you want a contractor who understands both the product and the house it’s in. Afternoon temperatures over 105°F and roof surfaces topping 150°F are a normal week here, and we suspect the most honest ways to protect your investment are on the table every time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Sunrise Manor
- Hardened or cracked glazing gaskets on aluminum windows. Intense UV and constant heat cycling turn the rubber gasket around the glass from flexible to brittle. Once it hardens, small cracks let in moisture, and the glass seal starts to fail from the inside. This is one of the most common PGT issues we see in Sunrise Manor, and it rarely has anything to do with the homeowner’s maintenance habits.
- Failed rollers and track misalignment on sliding glass doors. Dust intrusion is the culprit here. The fine grit we get in Sunrise Manor builds up in the roller housing and grinds away the bearings. Add constant thermal expansion and contraction, and the door starts dragging, then sticking, then scraping the track. Left alone, it can damage the frame.
- Corrosion of aluminum frame finishes. Older PGT units show pitting and chalky oxidation, especially on south- and west-facing walls. The desert sun bakes the anodized or painted finish until it fades and breaks down, and monsoon moisture gets into the pits. It’s cosmetic at first, structural later.
- Loose or degraded weatherstripping. When the weatherstripping fails, you get air infiltration, dust coming in and water tracking into the frame during monsoon downpours. Windward walls lose their weatherstripping faster, and the resulting air loss hits your energy bill every August.
- Fogged insulated glass units. When you see fog between the panes, it’s a sign the seal has failed. It’s a common problem for years-old PGT windows that have weathered many heat cycles. Replacement of the glass unit is often enough, but on some units the whole assembly needs to go.
PGT Parts & Our Repair-vs-Replace Approach

For PGT repairs, we use OEM parts when they’re available for critical components, including rollers, gaskets and hardware. When OEM is discontinued or the lead time would leave your home open, we use quality aftermarket equivalents for non-structural items. We don’t claim to stock or carry OEM or genuine PGT parts, and we’re not a PGT dealer. We get the right parts to fit your PGT equipment and get the job done.
Our repair-vs-replace thinking is simple: if the frame is sound and the problem is isolated, repair is usually the best value. When multiple units show systemic seal failure or frame damage, replacement with a modern PGT line is more cost-effective, and we’ll walk you through the numbers both ways. We have no brand bias and no incentive to push one option.
Call (833) 516-4965 for an honest assessment. We answer 24/7, and estimates are free.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the full window or door assembly: glass seal, gaskets, rollers, track, frame finish and weatherstripping. We test the operation of every sliding piece and check for air and water infiltration at the frame edges.
- 2
Repair or install. We confirm the exact part before we recommend anything. If it’s a repair, we replace only what has failed. If it’s an install, we set and level the new unit and seal it for the desert heat-and-moisture cycle.
- 3
Test. We open and close the unit, check for drag, confirm no air leaks, and verify proper drainage at the sill. On a door, we check the latch alignment after the part swap.
- 4
Warranty. We explain what the repair covers and provide written documentation so your PGT warranty stays uncomplicated. Before we close out the job, we note what to watch for over the next season.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Sunrise Manor
We service and install the PGT window and door lines you’re most likely to find in Sunrise Manor, including the PGT WinGuard Aluminum Series and WinGuard Vinyl Series, PGT Premier Series windows and doors, and PGT Eze Breeze Porch Enclosures. We handle window replacement, glass unit swaps, roller and track repair, gasket replacement, weatherstripping upgrades and frame finish work. On the exterior side, we also install new windows as part of a roof repair or roof replacement project. We don’t sell PGT units as an authorized dealer, and we don’t claim to stock any parts. We repair, install and service PGT equipment with quality parts that fit it. Call (833) 516-4965 for a free estimate.
We Also Service These Brands
Sunrise Manor Construction is a multi-brand shop, not a single-brand dependent one. Alongside PGT, we work with KraftMaid cabinetry, Kohler fixtures, GAF roofing products and Master Halco fencing. This means we can coordinate window replacements with a roof repair or a full roof replacement, or handle a kitchen or bath update in the same project. One contractor, one point of contact.
FAQs – PGT Construction Service in Sunrise Manor

Is Sunrise Manor Construction authorized by PGT?
No. Sunrise Manor Construction is an independent PGT service provider. We are not affiliated with, authorized by or certified by PGT. Our recommendations come from what’s practical for your home, not from the manufacturer.
Do you use quality parts that fit PGT equipment?
Yes. We use OEM parts when available for critical components, including rollers, gaskets and hardware, and quality aftermarket equivalents for non-structural items when OEM is discontinued or lead times are prohibitive. We don’t claim to stock or carry OEM or genuine PGT parts, and we’re not a dealer.
How long does PGT service take?
Most repairs, such as replacing rollers or a glass unit, can be completed in a single visit. More complex jobs, including a full window replacement or a multi-unit overhaul, usually need to be scheduled, and the timeline depends on part availability. Call (833) 516-4965 for an exact estimate on your PGT work.
What kinds of PGT products do you cover?
We service and install PGT WinGuard aluminum and vinyl windows, PGT Premier Series windows and doors, and PGT Eze Breeze porch enclosures. We handle window replacement, glass unit swaps, roller and track repair, gasket replacement and weatherstripping work.
Will service void my PGT warranty?
Not usually, if the work is done correctly and with parts that fit the unit. We document what we install and keep the repair within PGT’s warranty terms. If a repair could affect your coverage, we tell you before we start.
How much does PGT construction cost in Sunrise Manor?
Typical estimated ranges in Sunrise Manor are shown below. These are typical ranges only, and the written estimate sets the final price. Call (833) 516-4965 for an exact quote – estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Book Your PGT Service in Sunrise Manor, NV
If your PGT windows or doors are dragging, fogging or leaking, we can help. We repair, install and service PGT equipment with quality parts that fit it, and our estimates are free. Call (833) 516-4965. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Sunrise Manor Construction.












