







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Sunrise Manor Homeowners Choose Toto Construction
We provide independent Toto construction service in Sunrise Manor: we install, repair and service Toto toilets, Washlets and the bathroom fixtures around them, inside full remodel work rather than as a stand-alone sideline. What sets our Toto work apart is fit. We know the rough-in dimensions, mounting tolerances and trim kits these fixtures require, so a Toto install doesn’t get forced into a space built for something else. To be clear, we are not affiliated with, authorized by or sponsored by Toto, and we don’t sell their products as a dealer. We are an independent contractor that knows the line and services it honestly. Call (833) 516-4965 for a free estimate.

Why Trust Sunrise Manor Construction for Your Toto Construction?

Our technicians have up to 11 years of experience, and Toto fixtures show up often enough in the bathrooms we remodel that we’ve learned their habits. We know which fill valves fit which tank, where the trapway geometry meets an older drain, and why a Washlet that worked fine for years starts misbehaving once hard-water scale builds inside it.
We use quality parts that fit Toto equipment, and we choose them to protect the warranty rather than void it. That means matching the original fill valve and flapper spec where we can, keeping seals and gaskets to the right dimensions, and never forcing a universal part into a fixture engineered around something specific. When a genuine Toto component is the right call, we say so. When a discontinued model leaves a quality aftermarket option as the practical path, we say that too.
What we don’t do is guess. Toto equipment has engineering behind it, and treating a toilet or a bidet seat like a generic fixture is how small leaks become subfloor repairs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Sunrise Manor
Most Toto calls in Sunrise Manor come down to water, scale and time. Here’s what we see, and why it happens.
- Washlet control board and sensor failures. Electronic bidet seats live in a humid room and pull mineral-heavy water through their internals every day. Scale coats the sensors and nozzles, moisture reaches the control board, and eventually the unit stops responding or sprays erratically. A power test and a descale tell you whether it’s a fix or a replacement.
- Fill valve and flapper wear in Ultramax and Drake toilets. A toilet that runs intermittently or won’t stop filling is usually a worn fill valve or a flapper that no longer seals. Hard water speeds up the wear. Left alone, a running toilet quietly runs up the water bill.
- Wax ring and flange leaks at the closet bend. Toto’s longer trapway can meet an older cast-iron or ABS drain at an awkward angle. If the flange is cracked or the wax ring compressed wrong, water seeps at the base. That’s a slab-and-subfloor risk in Sunrise Manor’s older single-story homes.
- Tank-to-bowl gasket leaks on two-piece models. Years of hard-water exposure harden the gasket and corrode the bolts. You get a slow seep between tank and bowl that looks like condensation until you look closer.
- Bowl cracks and age-related failure. Porcelain doesn’t last forever. When a crack reaches the trapway or the bowl, replacement is the answer, not a patch.
A typical Toto toilet service call starts with a homeowner noticing the toilet runs intermittently or won’t stop filling, often traced to a worn fill valve or flapper in a Drake or Ultramax. A qualified pro shuts off the supply, drains the tank, and replaces the valve and flapper with OEM or quality aftermarket parts, then checks the wax ring and flange for leaks. For a Washlet that won’t power on or sprays erratically, the pro tests the outlet and control board, descales the nozzles, and advises repair or replacement based on parts availability.
Toto Parts & Our Repair-vs-Replace Approach

We don’t claim to stock or carry genuine Toto parts. What we do is source quality parts that fit Toto equipment, and we tell you plainly which path makes sense.
Repair is usually straightforward and cost-effective for valves, flappers, gaskets and seals. Those are wear items, and replacing them restores the fixture. For electronic Washlet failures, the math shifts. Control boards and sensors aren’t cheap, and a unit with a failed board and scaled internals may cost more to repair than to replace. Bowl cracks push you toward replacement outright. On discontinued models, a quality aftermarket part from a recognized supplier is a reasonable fallback when the original isn’t available.
We weigh parts availability, the age of the unit and what you’ll spend either way, then give you the honest read. Call (833) 516-4965 for a free estimate and we’ll walk through it with you.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We start at the symptom: a running toilet, a leak at the base, a Washlet that won’t power on. We check the supply, the fill valve, the flapper, the wax ring and flange, and on electronic units we test the outlet and control board.
- 2
Repair or install. Once we know what’s wrong, we set the right parts and the right fixture for the space. For a new install we confirm the rough-in dimension against the drain before anything gets set.
- 3
Test. We cycle the fixture, watch the fill and flush, check for seeps at the base and tank-to-bowl joint, and run the Washlet through its functions.
- 4
Warranty. We document what we used and how it was installed, so the work is warranty-safe and you have a record if the manufacturer needs one later.
Toto Products We Service & Install in Sunrise Manor
We work on Toto’s one-piece and two-piece toilets, including the Ultramax II (MS604114CEFG), the Drake II (CST454CEFG), and hi-efficiency models like the Nexus and Clayton. We service and install Washlet electronic bidet seats, including the S550e and C100. Around those fixtures we handle the full bathroom: walk-in shower installation, tub-to-shower conversion, vanity installation, tile and trim. If your project calls for a fixture we don’t name here, ask. Toto’s line is broad, and the tolerances that matter are the same across it.

See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Toto is one brand among many we work with. We install and service KraftMaid cabinetry, Kohler and Moen fixtures, GAF roofing systems and PGT windows and doors, alongside dozens of others across our seven service categories. That range means we can scope a Toto bathroom remodel without sending you to a separate vendor for the vanity, the counter or the shower valve. One contractor from the driveway to the roofline.
Toto Fixture & Bathroom Project Pricing in Sunrise Manor

Bathroom work around Toto fixtures lands in these typical ranges. The written estimate sets the final price.
| Project | Typical Estimated Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A full bathroom remodel in Sunrise Manor typically runs $9,000 – $28,000, and a small bathroom remodel $5,000 – $12,000. Call (833) 516-4965 for a free estimate.
FAQs – Toto Construction Service in Sunrise Manor
No. We are an independent Toto service provider, not affiliated with, authorized by or sponsored by Toto. We don’t sell their products as a dealer. We install, repair and service Toto fixtures with quality parts that fit them.
It depends on parts availability and the condition of the rest of the unit. If the board is available and the nozzles and sensors are sound, repair is the practical call. If the unit is scaled through and the board isn’t available, replacement usually costs less over time. We test the outlet and board before advising.
The fill valve is the usual culprit. A flapper that seals fine won’t stop a fill valve that no longer closes at the right water level, and hard water speeds that wear. We check both together rather than replacing one at a time.
Toto’s longer trapway can meet an older cast-iron or ABS drain at an angle that a standard flange doesn’t handle cleanly. We confirm the rough-in dimension and check the flange for cracks before setting the fixture.
Yes, Washlet seats mount on one-piece toilets like the Ultramax II, but the seat shape and the water supply connection have to line up. We check the fixture dimensions and the supply location before install.
A valve and flapper replacement is a small job, and we quote it per job with a written estimate rather than a flat rate. Call (833) 516-4965 for an exact quote – estimates are free.
Book Your Toto Service in Sunrise Manor, NV
If your Toto toilet runs, your Washlet misbehaves or you’re planning a bathroom remodel around Toto fixtures, we can help. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Call (833) 516-4965 for a free estimate. Licensed and insured, with written line-item quotes and fixed pricing.
Written by the team at Sunrise Manor Construction.












